x301
Best Way to Measure CPU, System and Hard Disks Temperatures ★☆★ Thu Jan 17, 2013 6:07 am
Post : 331
Points : 20218
SpeedFan
A small application that shows you fan speed, voltage and chip temperature.
Monitoring hardware temperatures is almost a
compulsory procedure that needs to be carried out on a daily basis, in
order to maintain and protect the health of your computer. What’s more,
by tweaking various voltage and temperature parameters, you can prevent
excessive heat from damaging your system.
The main viewing purpose of SpeedFan is to show its user what's really
going in their machine. When minimized, a temperature reading is showed
on the button right of the desktop. When Speedfan is in an open window
you can see a whole lot more. From Fan speed to total voltage, you can
view any and all of the current fans.
First of all, you have to identify which temperature sensor is which.
SpeedFan strictly adheres to available datasheets for each sensor chip.
Please remember that hardware monitors are chips that do have some pins
(small connectors) which should be connected to some additional hardware
(temperature probes, thermistors or thermocouples) in order to be able
to read temperatures.
Only a few hardware monitor chips do label their connectors with "CPU",
"System" and the like. Most of them use labels like "Temp1", "Local" or
"Remote". The hardware manufacturers connect available pins to different
temperature sensors basically according to the physical placement of
components on the motherboard.
This means that the same chip, an ITE IT8712F, for example, might be
connected to a sensor diode measuring CPU temperature on Temp2 and, on a
different hardware, it might be connected on Temp1. If you have a
"Local" sensor and a "Remote" labeled one, this usually means that
"Local" is the temperature of the monitor chip itself and "Remote" is
the temperature read from a "remote" probe.
When you have properly identified which temperature sensor is which, try
to lower the speed of each fan and look at reported speed and
temperatures. If you do not allow SpeedFan to change any fan speed and
set all the speeds too low, then SpeedFan won't be able to avoid
overheating.
Here are some key features of "SpeedFan":
· handle almost any number of South Bridges
· handle almost any number of hardware monitor chips
· handle almost any number of temperature readings
· handle almost any number of voltage readings
· handle almost any number of fan speed readings
· handle almost any number of PWMs
What's New in This Release:
· DELL support can now change fan speeds of a wider range of systems
· Nvidia video card support should now be able to access the I2C with latest driver revisions
· Added support for Intel Patsburg SMBus
DOWNLOAD | SpeedFan 4.44.zip]
Software for monitoring System voltage, Fan speed and Chip temperature!