Marquel World Information Technology

NOTE: ITO LANG NAKITA KO SA NET SO IF WALA SA PRINTER NYO ANG KASALI REQUEST PO KAYO DITO BAKA MAKITA KO SA NET PO! AND MUST OF ALL FIRST IS TRY YOU TO EXPERIMENT THESE EXIST RESETTERS IF GUMANA SA PRINTER NYO AND PLS FEEDBACK PO HA!


PLEASE HELP ME SA PAG CREATE NG TUTORIAL PARA MAKATULONG TAYO SA IBA!

KINUHA KO SA IBA LIBRE! PINA PUBLISH KO DITO SA SYMBIANIZE FORUM LIBRE AT WALANG PPD! DAPAT PAG SHARE NYO NITO SA SITE MO DAPAT LIBRE! WALANG PPD LINKS HA!(SHRINK8.COM, ADF.LY, OUO.IO, ETC) GETS???

LIST OF PRINTERS WERE AVAILABLE THE RESETTERS!


CANON IP2770


CANON IP2770-MP237-MP287


CANON MP198


CANON MP230-MP280-MP282-MP287


CANON STV4720


CANON E510-E500

Tutorial (Under Construction)
How to Reset Canon PIXMA IP2770

Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,
Turn off the printer without pulling the power cords.
Hold down Resume button and press Power button.
Keep holding down Power button and let Resume button go.
Then Press Resume button 5 times then let BOTH buttons go.
You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

Using the Service Tool

Method 1: Clear Ink Counter Main

Load paper to the printer
Clear ink counter, select MAIN (1), wait for the printer to finish printing
Close Service Tool
Turn off printer (wait 10 seconds)
Turn on printer.
Printer ready for use
Method 2: Clear Ink Counter Main and Platen

Load paper to the printer
Clear ink counter, select MAIN (1), wait for the printer to finish printing
Clear ink counter, select PLATEN (2), wait for the printer to finish printing
Close Service Tool
Turn off printer (wait 10 seconds)
Turn on printer.
Printer ready for use
Method 3: Reset Ink Absorber Value Main

Ink absorber counter, select Main (1)
Counter value = 0% (2)
Click SET (3)
Close Service Tool
Turn off printer (wait 10 seconds)
Turn on printer.
Printer ready for use
Method 4: Reset Ink Absorber Value Main&Platen

Ink absorber counter, select Main&Platen (1)
Counter value = 0% (2)
Click SET (3)
Close Service Tool
Turn off printer (wait 10 seconds)
Turn on printer.
Printer ready for use

How to Reset your Canon MP287
“Canon MP287 printer should be in SERVICE MODE.”

Entering Service Mode
Turn the printer off (ON/OFF)
Press and hold the STOP/RESET
Press the Power ON/OFF
Remove the STOP/RESET (Note: power ON/OFF is still on hold
Press the STOP/RESET 6x and release the STOP/RESET and Power ON/OFF
The entered the Service Mode, all LED will stop blinking
Using Service Tool


Method 1: Clear Ink Counter Main

Load paper to the printer
Clear ink counter, select MAIN (1)
Click SET (2), wait for the printer to finish printing
Close Service Tool
Turn off printer (wait 10 seconds)
Turn on printer.
Printer ready for use
Method 2: Clear Ink Counter Main and Platen

Load paper to the printer
Clear ink counter, select MAIN (1)
Click SET (2), wait for the printer to finish printing
Clear ink counter, select PLATEN (3)
Click SET (4), wait for the printer to finish printing
Close Service Tool
Turn off printer (wait 10 seconds)
Turn on printer.
Printer ready for use
Method 3: Reset Ink Absorber Value Main

Ink absorber counter, select Main (1)
Counter value = 0% (2)
Click SET (3)
Close Service Tool
Turn off printer (wait 10 seconds)
Turn on printer.
Printer ready for use
Method 4: Reset Ink Absorber Value Main&Platen

Ink absorber counter, select Main&Platen (1)
Counter value = 0% (2)
Click SET (3)
Close Service Tool
Turn off printer (wait 10 seconds)
Turn on printer.
Printer ready for use

Published by LaCe12
Hit Thanks kung may naitulong ako sa yo!